Printers and Scanners
Driverless Printing and Scanning (IPP)
Since version 21, Linux Mint features driverless printing and scanning:
Printers and scanners are detected and added automatically.
Communication with the device is done via a standard protocol called IPP.
No drivers are needed.
Installed drivers are not used.
This standard protocol works with many devices, so for most printers and scanners, there is nothing to do. Everything just works out of the box.
To print a document open File -> Print… in your application.
To scan a document open Document Scanner from the application menu.
If your device doesn’t work well with IPP you can use drivers from your manufacturer instead.
In this case you need to:
Install your manufacturer’s drivers
IPP takes priority so as long as it’s installed, drivers won’t be used.
To remove IPP support from your computer open a terminal and type:
apt remove ipp-usb sane-airscan
The HP drivers are called HPLIP.
They are open-source and they already are installed by default in Linux Mint.
In addition to the already installed hplip driver, there is a package available in the Linux Mint repositories called hplip-gui.
This package provides the following utilities:
An HP status tray icon
HP Device Manager
HPLIP Fax Utility
Fax Address book
Although you do not need hplip-gui to use your HP device, it can provide extra information (such as ink levels) and help troubleshooting.
Installing the proprietary plug-in
Some HP printers require proprietary software technologies to allow full access to printer features and performance. Unfortunately, these technologies cannot be open sourced, but to resolve this HP uses a binary plug-in for these printers.
To see if your printer requires the HP plugin-in, check the list of devices at the HP Developer Website.
To install the plugin-in, open a terminal and type:
apt install python3-pyqt5
Then follow the instructions written on that website.
Brands which provide .deb packages
The following brands provide Linux drivers for their printers and scanners in the form of .deb packages:
Look for Linux drivers on your manufacturer’s website, download the packages and double-click them to install them with Gdebi.
When you have a choice between different package options, choose .deb. If you have a choice for the package architecture choose amd64 (note that this is sometimes called x86_64 or even just 64-bit).
Canon provides Linux drivers for its printers and scanners. They have different websites for Europe, the USA and various countries.
When downloading drivers from Canon, choose the debian Package archive option.
If they come as .tar.gz archives, decompress them.
Canon driver archives usually contain an install.sh script which already has execution permissions. Run it and follow the instructions provided by Canon.
Brother provides a utility to download and install the right driver for you.
Download the utility, choose deb when asked.
Decompress it, give it permission to execute and run it in a terminal:
chmod a+rx ./linux-brprinter-installer*
Then follow the instructions provided by Brother.
Adding IPP support
In Linux Mint 20.x IPP isn’t installed by default.
If you want to give it a try, remove your printer using the Printers configuration tool.
Then install ipp-usb and sane-airscan from the repositories:
apt install ipp-usb sane-airscan
Finally reboot the computer.
Disabling network printers detection
Network printers are automatically added and reappear even if you remove them.
If you do not like this behaviour, remove the cups-browsed package.
ippusbxd was an early implementation of IPP over USB. It didn’t work well and caused many issues. It was installed by default in Linux Mint 20. If this package is installed on your computer, make sure to remove it.
apt remove ippusbxd
Then reboot your computer.
More information is available online on: